Dinesh Steels India
Girgaon, Mumbai, Maharashtra
GST No. 27AFQPM0731F1ZH
TrustSEAL Verified
Call 08042903584
82% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 500 Kg |
| Size | 3 inch |
| Shape | Round |
| Unit Pipe Length | 6 meter |
| Material | Stainless Steel |
| Surface Finish | Mill Finished |
| Material Grade | SS304 |
Product Details:
| Usage/Application | Automobile Industry |
| Grade | 300 series |
| Material | Stainless Steel |
| Finish | Polished |
| Width | 800 - 1500 mm |
| Thickness | 0.3 - 3 mm |
We are a reputed trader and exporter of a wide variety of stainless steel and Duplex steel strips that are manufactured using quality steel and latest technology. Designed as per the application requirements of differed industries, these stripes are available in thickness of 0.05 mm to 3.00 mm and width of 6 mm to 460 mm.
Complete range of Stainless Steel Magnetic / Non-Magnetic grade Sheets, Plates Coils.
We provide :
JINDAL, SAIL, IMPORTED Matirial.
Cut to Size Sheets, Coils
Soft, 1/4 Hard, Half Hard, Full Hard
Mill Finish, Polished, No.8 Finish
300 Series, 400 Series, Others..
|
Range of Stainless Steel Strip, Flat & Blank |
||||
|
Sr. No. |
Material |
Size |
Thickness |
Specification |
|
1 |
Stainless Steel Sheet |
1000 mm x 2000 mm |
0.3 mm |
A-240 |
Stainless Steel (SS) in Grade :- 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309,
310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.
Sheet Finishing :- 2B, 2D, HR, CR, BA (No. 8), Satin (Met with Plastic Coated)
Sheet & Plate in Form of :- Coils, Foils, Shim Sheet, Perforated Sheet,
Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
& Angle, Channel, Tray Etc.
Other Services :- Heat Treatment, Anneling, Pickling, Polish, Electroplating, Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Test Certificate :- Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.
Specialize :- Shim Sheet, Perforated Sheet (Round, Square & Oblong Hole)& as per your Drawing.
Additional Information:
Product Details:
| Steel Grade | SS 304 |
| Material | Stainless Steel |
| Surface Treatment | Hot Rolled |
| Thickness | 0.3 - 120 mm |
| Size | 3 mm - 25 mm,1 inch - 10 inch |
| Width | 1000 - 2000 mm |
Additional Information:
Product Details:
| Single Piece Length | 6 meter |
| Usage/Application | Manufacturing |
| Thickness/Diameter | >4 inch, 2-3 inch |
| Application | Construction |
| Material Grade | SS 304 |
| Shape | Round |
| Is It Anodized | Non Anodized |
| Is It ISO Certified | Non Certified |
| Diameter | 2 mm to 40 mm |
| Condition | Second hand |
| Length | Upto 7 meter |
We stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.
Additional Information:
Product Details:
| Thickness/Diameter | >4 inch |
| Single Piece Length | 6 meter, 3 meter |
| Material | Stainless Steel |
| Shape | Round |
| Diameter | 6 to 400 mm |
| Length | 1 ~ 8 meters |
We stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.
User Industries:
Additional Information:
Product Details:
| Structure | ANGLE |
| Material Grade | SS 304 |
| Usage/Application | Construction |
| Technique | Hot Rolled |
| Material | Stainless Steel |
| Dimension | 20 x 20 x 3 to 100 x 100 x 12 (mm) |
Additional Information:
Product Details:
| Material | Stainless Steel |
| Length | 6m, 3m |
| Hollow Sections | Square, Circular |
| Pipe Fluid | Chemical, Water, Gas |
| Condition | New |
| Unit Pipe Length | 3 meter, 6 meter |
| Thickness | 1 - 30 mm |
| Outer Diameter | 5 - 500 mm |
Additional Information:
Product Details:
| Material Grade | SS 304L |
| Shape | Round |
| Usage/Application | Manufacturing |
| Application | Construction |
| Single Piece Length | 6 meter |
| Material | Stainless Steel |
We stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.
User Industries:
Additional Information:
Product Details:
| Material Grade | SS 304 L |
| Single Piece Length | 3 meter, 6 meter |
| Thickness/Diameter | 0-1 inch, 2-3 inch, >4 inch, 3-4 inch, 1-2 inch |
| Material | Stainless Steel |
| Diameter | 2 mm to 40 mm |
| Length | Upto 6 meter |
We stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.
User Industries:
Additional Information:
Product Details:
| Application | Automobile Industry, Oil & Gas Industry, Pharmaceutical / Chemical Industry, Construction |
| Product Type | Circles |
| Grade | Stainless Steel 304 / 304L |
| Thickness | 1 mm to 100 mm |
| Diameter | Upto 2000 mm |
| Cutting | Plazma, Machined Cut & Punch Cutting |
Additional Information:
Product Details:
| Material | Stainless Steel |
| Structure | ANGLE |
| Usage/Application | Industrial |
| Application | Building Construction |
| Size | 20 x 20 x 3 to 100 x 100 x 12 (mm) |
| Available Material | Stainless Steel, Alloys |
Additional Information:
Product Details:
| Shape | Square |
| Usage/Application | Industrial |
| Size | 10-20 mm |
| Brand | STANDARD |
| Material | Stainless Steel |
| Single Piece Length | 3 meter, 6 meter |
Product Details:
| Size | 3 inch |
| Material Grade | 304 |
| Material | Stainless Steel |
| Shape | Square |
| Unit Pipe Length | 3 meter, 6 meter |
| Technique | ERW |
We supply a range of high quality stainless steel welded / ERW pipes that are used in various industrial applications. Complying with the international standards, these can be availed in various sizes and specifications to suit the diverse requirements of the clients.
Grades
300 series : 304, 304L, 316, 316L, 317L,321, 347H, 310
200 series : 201, 202
400 series : 409, 409L, 410, 430
Product Details:
| Shape | STANDARD |
| Grade | 304 & 304L |
| Thickness | 1 mm to 100 mm |
| Diameter | Upto 2000 mm |
| Inner Diameter | Minimum 50 mm-1000 mm(tool cut) above that plazma cut. |
| Cutting | Plazma,Machined Cut & Punch Cutting. |
Additional Information:
Product Details:
| Thickness | STANDARD |
| Material | Stainless Steel |
| Type | Welded, Seamless |
| Wall Thickness | 1 mm - 25 mm |
| Available Shape | Square,Rectangular,Round,Oval |
| Length | 2B,BA |
Additional Information:
Product Details:
| Minimum Order Quantity | 500 Kg |
| Size | 1/2 inch |
| Diameter | STANDARD |
| Shape | Round |
| Unit Pipe Length | 6 meter |
| Material Grade | SS304 |
| Technique | ERW |
Product Details:
| Minimum Order Quantity | 500 Kg |
| Shape | Square |
| Material Grade | SS 304 L |
| Usage/Application | Automobile Industry |
| Material | Stainless Steel |
| Application | Construction |
| Dimension | 25 x 3 x 5 to 50 x 150 x 6 (mm) |
Additional Information:
Product Details:
| Shape | Square |
| Material Grade | SS 304 |
| Usage/Application | Automobile Industry |
| Material | Stainless Steel |
| Application | Pharmaceutical / Chemical Industry, Construction |
| Dimension | 25 x 3 x 5 to 50 x 150 x 6 (mm) |
Additional Information: