NICKEL ALLOY

Product Details:

Alloy 925 is an age hardenable nickel based alloy that contains chromium and iron. Its composition offers a high level of strength and corrosion resistance.

Often sold as Inconel 925, alloy 925, it is known for a number of different unique properties including

• Protection in oxidizing and reducing atmosphere
• Resistance to chloride ion stress-corrosion cracking
• Excellent resistance to pitting and crevice corrosion

Many different industries rely on Alloy 925 for a number of uses including

• Valves, hangers, packers, and tubulars for sour gas production
• Marine fasteners and pump shafts

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Delivery Time: 2-3 DAYS

Product Details:

Another member of the 800 alloy family is Incoloy® 800HT. Also sold as Nickel Alloy 800HT, this nickel-iron-chromium alloy, has many of the same characteristics of other members of the 800 alloy grouping. Incoloy 800HT has roughly the same chemical composition as Incoloy 800H, differing only slightly in carbon, aluminum, and titanium levels. A good way to understand the difference between 800HT and 800H is that the chemical composition of Incoloy 800HT will always be within the limits of Incoloy 800H, but the reverse is not true.

Product Details:

• Fe 39.5% min
• Ni 30-35%
• Cr 19-23%
• Al+Ti .85-1.20%
• C .06-.10%

Incoloy 800HT is known for many of the same outstanding characteristics as Incoloy 800H including:

• Excellent resistance to oxidation, sulfidation, and carburization
• Higher creep and rupture properties for high temperature situations above 1100°F (600°C)
• Resistant to high temperature corrosion and prolonged exposure
• Readily machined by standard methods
• Resistance to aqueous corrosion at moderate temperatures

User of Incoloy 800HT and Nickel Alloy 800HT use the alloy for a wide range of high-temperature applications including:

• Hydrocarbon cracking
• Industrial furnace and boiler components and equipment
• Equipment for Heat-Treating
• Pressure vessels and heat exchangers
• Chemical and Petrochemical processing

Product Details:

• Continental Steel & Tube is a distributor of Incoloy 800HT and Nickel Alloy 800HT in pipe, tube, sheet, strip, plate round bar, flat bar, forging stock, hexagon, and wire. As with everything we source, each form of Incoloy 800HT meets different critical industrial standards from organizations like ASTM, ASME, BS, SEW, DIN, EN, and ISO.
• We stock and sell Nickel Alloy 800HT and Incoloy® 800HT® in Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Delivery Time: 2-3 DAYS

Product Details:

Inconel® X-750, also known as Nickel Alloy X-750, is popular and cost-effective precipitation-hardenable nickel-chromium alloy.

Inconel X-750s wide spread use is due to its numerous benefits which include:

• High strength at temperatures to 1500°F (816°C) after suitable heat treatment
• Creep-rupture strength at high temperatures to about 700oC (1290oF)
• High tensile and creep-rupture properties
• Resistance to a wide variety of industrial corrosives under both oxidizing and reducing conditions
• Excellent workability including machinability and welding
• Resistance to chloride ion stress-corrosion cracking
• Precipitation hardenable

Because of its excellent properties, ease of fabrication, and wide range of forms, Inconel X-750 and Nickel Alloy X-750 play a major role in a number of different industries and applications:

• Gas turbines
• Jet engine parts
• Nuclear power plant applications
• Heat-treating fixtures
• Forming tools and extrusion dies
• Pressure vessels
• Aircraft structures

Inconel X-750 and Nickel Alloy X-750 have a unique chemical composition that includes:

• Ni 70% min
• Cr 14-17%
• Ti 2.25-2.75%
• Nb .70-1.20%
• Mn 1% max
• Si .50% max
• Cu .50% max
• C .08% max

Product Details:

• Continental Steel is a supplier of Inconel X-750 and Nickel Alloy X-750 in sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire, tube, and extruded section. Inconel X-750 and Nickel Alloy X-750 meet or exceed a number of industry standards including those from ASTM, ISO, SAE, EN, and BS.
• We stock and sell Nickel Alloy X-750 and Inconel® X-750 in Sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire, tube and extruded section

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Delivery Time: 2-3 DAYS

Product Details:

Referred to as Nickel Alloy 825, Incoloy® 825 is a nickel-iron-chromium alloy with small amounts of molybdenum, copper, and titanium. This combination gives Incoloy 825 enhanced corrosion resistance in the harshest environments.

Like many of the alloys in the Incoloy family, Incoloy 825 offers users a number of benefits:

• Excellent resistance to both reducing and oxidizing acids like sulfuric and phosphoric
• Helps avoid stress-corrosion cracking
• Stops localized attacks such as pitting and crevice corrosion
• High level of resistance to variety of oxidizing substances such as nitric acid, nitrates, and oxidizing salt

Because of its superior corrosion resistance characteristics, Incoloy 825 is in use in a number of industries and applications including:

• Chemical processing
• Pollution control
• Calorifiers
• Oil and gas recovery
• Hot vessels for food, water, and seawater
• Acid production
• Pickling tank heaters, tanks, and equipment
• Nuclear fuel reprocessing
• Radioactive waste handling
• Marine exhaust systems

Like most of the Incoloy family of alloys, Incoloy 825 has a unique chemical composition which includes:

• Ni 38-46%
• Fe 22% min
• Cr 19-23.5%
• Mo 2.5-3.5%
• Cu 1.5-3%
• Mn 1% max
• Ti 0.6-1.2%

Other Details:

• Incoloy 825 is available via Continental Steel in wide variety of shapes and forms including, pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, and wire. The various forms of Incoloy 825 meet different critical industrial standards from organizations like ASTM, ASME, BS, SEW, DIN, EN, and ISO.
• We stock and sell Nickel Alloy 825 and Incoloy® 825 in Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Delivery Time: 2-3 DAYS

Product Details:

Duplex Nickel Alloy Pipes offered by us are made available in grade series of 300, UNS S32550, S32750 and S32760. Further, we can also deliver these in other specifications as demanded by the customers.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other

Product Details:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Alloy 20, also known as Carpenter® 20 and Incoloy® 20, is an austenitic nickel-iron-chromium alloy. This super alloy, which also includes copper and molybdenum, is popular in the production of gasoline, solvents, explosives, chemicals, pharmaceuticals and food and synthetic materials.

It offers users a wide variety of benefits including:

• Excellent resistance to corrosion, crevice corrosion, and pitting
• Perfect for use around sulfuric, phosphoric, and nitric acids
• Ease of fabrication and elevated mechanical properties
• Available in flat bar, forging stock, hexagon, plate, pipe, sheet, strip, round bar, tube, and wire, Alloy 20 can be fabricated to produce:
• Mixing Tanks
• Heat Exchangers
• Process Piping
• Pickling Equipment
• Pumps, valves, fasteners, and fittings
• Alloy 20 meets or exceeds different industry standards including a multitude of ASTM, ASME, ISO, and DIN standards. TIG, MIG, and SAW welding can be used on Alloy 20, and can be formed through hot and cold working.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Delivery Time: 2-3 DAYS